Customizable Pillar Set For Märklin H0 C-Track 3D Printer Model
The file 'Customizable Pillar Set For Märklin H0 C-Track 3D Printer Model' is (stl,scad) file type, size is 313.91 KB.
The file 'Customizable Pillar Set For Märklin H0 C-Track 3D Printer Model' is (stl,scad) file type, size is 313.91 KB.
12 pillar set for Märklin H0 C track up to 78mm (about 3 inches).
78mm should be enough for a second crossing below. Please check it before, especially for trains with current collectors.
UPDATE V2: now customizable. Now each pillar is numbered and labeled so it is easy to distinguish them.
Please note the pillars are angled on the track bed for a better stand. Put one pillar in between each track segment. Be sure you assemble them correct and it has a stable stand.
| pillar_13_v2.stl |
| pillar_19_v2.stl |
| pillar_26_v2.stl |
| pillar_32_v2.stl |
| pillar_39_v2.stl |
| pillar_45_v2.stl |
| pillar_52_v2.stl |
| pillar_58_v2.stl |
| pillar_65_v2.stl |
| pillar_6_v2.stl |
| pillar_71_v2.stl |
| pillar_78_v2.stl |
| pillar_full_ramp_v2.stl |
| pillar_top_level_v2.stl |
| pillar_v2_1.scad |
