Customizable Magnetic Box 3D Printer Model
The file 'Customizable Magnetic Box 3D Printer Model' is (stl) file type, size is 400.6KB.
The file 'Customizable Magnetic Box 3D Printer Model' is (stl) file type, size is 400.6KB.
Wanted to design a boardgame with custom boxes for each piece. Files for a container, blank customizable hex lid, and a few examples of customized lids.
I used 2mm x 4mm circular magnets (amazon $9 for 300: link below) to keep the lid connected, and found that they worked the best when raised slightly above the hole line. I did this by adding a little clay (you could use anything) and then super gluing them in place. They are super satisfying!
I wanted to make something completely customizable for everyone, so good luck and happy printing!
Magnets:
https://www.amazon.com/Magnets-Refrigerator-Neodymium-Whiteboard-
Kitchen/dp/B0CCXZ1J6N/ref=sr_1_1_sspa? crid=1HC5F8LHQC5TM&keywords=4mm+x+2mm+neodymium+magnets&qid=1705461440&sprefix=2mm+x+4mm+ma%2Caps%2C853&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
| Blank_Lid.stl | 235.5KB | |
| Box_Base.stl | 139.5KB | |
| Castle_Lid.stl | 246.7KB | |
| Vehicle_Lid.stl | 760.4KB |
