The file 'Customizable Folding Bit/pencil Holder (fusion360) 3D Printer Model' is (f3d,stl) file type, size is 1.5MB.
--- Thank you to SenJos for motivating me. ---
--- Due to the large number of parameters, it may still contain bugs. Please pardon. ---
This is the customizable version of my thing "Folding Hex Bit Holder"(https://www.thingiverse.com/thing:4750734)
It can hold the hex bits, the color pencils or other cylindrical objects.
Customization is done by changing the parameters of fusion360 file (.f3d).
Try this once.
[Bolt type to use]
type: CAP bolt M3, M4, M5, M6 ...(M3 is standard)
bolt length: The recommended length is 15mm(M3), 20mm(M4), 25mm(M5), 30mm(M6) ...
When using screws other than M3 by changing the corresponding parameters, but it may not work because almost not verified. Sorry.
[Customizable parameters]
-target diameter (min:5mm, max: no limit)
-number of holes in a bar (min: 2, max: 24)
-number of bars you will combine (min:3, max: no limit)
-bar additional height (min:0mm, max: no limit) It may be effective when used for a tall target.
When changing the bolt diameter, change the following parameters.
-bolt diameter (M3=3, M4=4, M5=5, M6=6 ...)
-bolt head diameter (M3=5.5, M4=7.0, M5=8.5, M6=10.0 ...)
-bolt head height (M3=3.0, M4=4.0, M5=5.0, M6=6.0 ...)
[print conditions]
filament ... PETG
support ... Yes (It is better to block the support for the bit hole part.)
brim ... No
infill ... bar:0% (Highly recommended), binder:15%-100%
perimeters ... 2 or 3 lines (Please select with the tightness of inserting the bit)
[caution]
Since the input value of the parameter is not verified in fusion360, an error may occur. For example, when using a large bolt for a small target diameter.
If an error occurs, click the OK button in the parameter change window, and then click the undo button to return.
[note]
I'm looking forward to makes and remixes. Please upload yours.
customizable_folding_holder.f3d | 1.4MB | |
sample_M3_12x5_bar.stl | 800.0KB | |
sample_M3_12x5_binder_odd_bottom.stl | 92.5KB | |
sample_M3_12x5_binder_odd_top.stl | 139.1KB |