Customizable Fence Post Cap 3D Printer Model
The file 'Customizable Fence Post Cap 3D Printer Model' is (stl,scad) file type, size is 330.2KB.
The file 'Customizable Fence Post Cap 3D Printer Model' is (stl,scad) file type, size is 330.2KB.
The top of one of our 4" wood fence posts was rotted out, so I made this customizable cap to place over the top and improve both looks & structural integrity without replacing the post. Default dimensions in the attached files are for a 4" square wood post (actual 3.5"), but you can customize to your liking. Rectangular posts are supported -- does not need to be square.
Optionally, you can use customizer to change the top bevel angle, remove the back, and/or notch out the sides (to slip over existing 2x4's for example), and/or add supports to the sides. See some examples in the attached STL files.
The SCAD file includes an optional round finial, but you can disable it by setting "sphere_finial_radius" to 0.
| fence-post-cap-no-finial-no-side-supports.stl | 95.2KB | |
| fence-post-cap-no-finial-open_sides-and-rear.stl | 75.5KB | |
| fence-post-cap-no-finial-with-side-supports.stl | 101.7KB | |
| fence-post-cap-with-finial-and-side-supports.stl | 1.2MB | |
| fence-post-cap-with-finial.stl | 1.2MB | |
| fence-post-cap.scad | 5.4KB |
