Use the customizer to make a egg base of led egg light lamp.
Step 1
Use Easter Egg Maker 2015 from Richard Swika to make an egg (egg_length=50mm).
Step 2
Print the egg with these settings:
Infill Desity : 0%
Solid Bottom Infill : disable
Cut off Bottom of Object : 2mm (any value you want)
Step 3
Measure the diameter of the bottom of the egg and use the customizer to make an egg base.
| egg-base-for-50mm-and-cut-off-2mm.stl | 178.5KB | |
| egg-base.scad | 1.0KB |
