Update
29/01/2020: My wife wanted something easier to hang her chains on, without having to clip them around the existing closed hangers. This is a simple addition that allows her to just hang them over the ends.
Earring tree Chain Holder v7.stl
Summary
My wife has quite a few earrings and rings and she didn't have anything useful for storing and displaying them. Jewellery boxes just got filled up and then never used. She would end up just leaving them out on the counter so she would know what she had. They would end up getting all mixed up, lost or a tangled mess.
I designed this piece to be practical, adjustable and functional. It is made up of 3 different rings. The base can be used to hold rings or other jewellery, each ring can hold earrings with hooks or other fasteners that can hang over a lip, and one of the larger rings has outside holes where studs can be inserted. It has 2 sizes of spacer, 25mm and 50mm and also an additional m/f design of 25mm and 50mm that can allow you to create different heights.
The pieces are all threaded so they can screw together and I have adjusted the threads so they fit together easily. There is also a 3 part finial for the top that consists of a threaded base, a bowl and a threaded top piece. This is designed to finish off the top of the stand and can be used to hold rings.
I also designed the pieces so that you can use a small wrench when tightening or undoing the threaded parts because plastic pieces are not always easy to put together or take apart if the sizes are not exact.
Print the parts you need and assemble it the way you like. It can also be used to hold chains if you join enough pieces together.
It has been designed to print on the MPMD as I made the largest piece (the base) only 95 mm in diameter.
| Earring_tree_25mm_Joiner_v5.stl | 273.0KB | |
| Earring_tree_25mm_M-F_Joiner_v5.stl | 315.8KB | |
| Earring_tree_50mm_Joiner_v5.stl | 266.6KB | |
| Earring_tree_50mm_M-F_Joiner_v5.stl | 304.0KB | |
| Earring_tree_55mm_v5.stl | 564.3KB | |
| Earring_tree_85mm_Standard_Ring_v5.stl | 816.9KB | |
| Earring_tree_85mm_Stud_Ring_v5.stl | 1019.0KB | |
| Earring_tree_95mm_Base_v5.stl | 263.4KB | |
| Earring_tree_Chain_Holder_v7.stl | 993.6KB | |
| Earring_tree_Finial_base_v5.stl | 339.4KB | |
| Earring_tree_Finial_bowl_v5.stl | 38.6KB | |
| Earring_tree_Finial_top_v5.stl | 326.2KB |
