An improvement on the previous model of the resistor storage container( https://www.thingiverse.com/thing:6557120 ).
Now the model is customizable, you can use Customizer for specify the parameters you need for the container.
On the lid, the values ​​must already be written down manually.
Print settings:
Line width - 0.4mm;
Layer height - 0.2mm;
3 wall lines;
Printing without supports.
P.S. In the customizer the corners on the container are poorly displayed, but on the 3D model itself there are no problems with them.
| ElemBox.scad | 4.7KB | |
| ElemBox.stl | 43.9KB | |
| ElemBox1x10.stl | 32.4KB | |
| ElemBox2x2.stl | 26.8KB | |
| ElemLid.stl | 34.3KB | |
| ElemLid1x10.stl | 23.1KB | |
| ElemLid2x2.stl | 18.4KB | |
| tweezers.stl | 105.9KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
