This is a customizable design for a caged pin bearing.
In case you may have a problem with "Elephant's Foot," this design offers the ability to compensate by adding a bevel to all bottom edges of your model. Printing on a raft didn't work for me, and it needlessly wasted filament and adhesion was bad between the raft and the first actual layer of the model.
The model provides no error checking in case you provide invalid inputs. For this reason, it's probably a good idea to check any customized designs in your slicer before committing to a print.
This was loosely based on a design by Luke Sky.
Renderings were created with Blender.
| caged_printable_bearing_set.scad | 3.9KB | |
| caged_printable_bearing_set._80_40_25.stl | 3.6MB | |
| caged_printable_bearing_set_55_15_20.stl | 2.7MB | |
| caged_printable_bearing_set_55_15_25.stl | 2.1MB | |
| caged_printable_bearing_set_65_20_25.stl | 2.7MB |
