Customizable Aquarium Lid Frame For 5.5 Gallons 3D Printer Model
The file 'Customizable Aquarium Lid Frame For 5.5 Gallons 3D Printer Model' is (stl) file type, size is 855.0B.
The file 'Customizable Aquarium Lid Frame For 5.5 Gallons 3D Printer Model' is (stl) file type, size is 855.0B.
I needed a vented lid for my 5.5 gallon aquarium and couldn't find any that had openings for the lift tubes my under gravel filter uses, so I came up with this.
Instructions:
Print 6 of these, glue two pieces to each other with a mesh of your preference sandwiched between.
Leave whichever opening you need clear for your filter, lift tubes or airstone + tubing.
IMPORTANT:
This part is not designed for rimless tanks, I do not use those. You'll have to rescale for that and probably design some sort of lip to keep it from sliding off and dipping into the water.
In a standard 5.5 gallon, the plate will comfortably slot into the dip in the rim designed for a glass lid.
| Aquarium_Lid_Frame.stl | 4.6KB |
