Originally based on the papabravo's Battery Dispenser, this is a reengineered version created with OpenSCAD. This means you can customize it to work for any arbitrarily sized battery, given the length and diameter. Use one of the pre-generated STL files or create your own with the "Open in Customizer" button.
Pre-generated STL files for:
Changes from the original design: All common battery types are now supported. You can choose "base" for the bottom or "extension" for an add on to the top. The extensions can be stacked as many as you want. These all also have the same depth now so you can line them up against a wall and they will all align in the front.
Note: unlike some of the other designs with tracks for the batteries, this design has them all collected in a bin. This trades density for reliability. So yes, this design will jam occasionally, but the slot in the front allows you to poke your finger in and remove the jam, which is quite easy.
Printing:
| BatteryDispenser18650_Base.stl |
| BatteryDispenser18650_Extension.stl |
| BatteryDispenser9v_Base.stl |
| BatteryDispenser9v_Extension.stl |
| BatteryDispenserAAAA_Base.stl |
| BatteryDispenserAAAA_Extension.stl |
| BatteryDispenserAAA_Base.stl |
| BatteryDispenserAAA_Extension.stl |
| BatteryDispenserAA_Base.stl |
| BatteryDispenserAA_Extension.stl |
| BatteryDispenserC_Base.stl |
| BatteryDispenserC_Extension.stl |
| BatteryDispenserD_Base.stl |
| BatteryDispenserD_Extension.stl |
| Customizable_Battery_Dispenser.scad |
![Customizable Plectrum ([guitar] Pick) 3D Printer Model](https://res.3axis.co/9a53e487-c349-402a-a587-2ffa375bc090/images/4a54637d-17dd-4f05-8622-caa3dda3ff4f_thumb.jpg)
