Customizable Airbrush Filter Cassette 3D Printer Model
The file 'Customizable Airbrush Filter Cassette 3D Printer Model' is (stl) file type, size is 71.1KB.
The file 'Customizable Airbrush Filter Cassette 3D Printer Model' is (stl) file type, size is 71.1KB.
This is a customizable airbrush filter cassette, that can hold filters from 10mm, up to 24mm in thickness.
So you can buy the filter, or filters (combination) you need in bulk and cut them down to size.
All depending on your needs and setup.
The cassette is roughly 50cm x 30cm.
It’s made specifically for the "Homemade DIY Carboard Spraybooth" as seen in the YouTube video on the PropsNstuff channel.
Link to Airbrush filter cassette video build:
https://youtu.be/uMRvNmkU1qE
Link to the original making of the cardboard spray booth:
https://youtu.be/rr20tYqUPUk
The filter cassette comes in 2 versions.
Version A is cut in 2, for those of you with a large print bed.
Version B is cut into 4 parts, for those of you with a slightly smaller print bed.
Both versions will of course result in the same finished model.
There is no need for supports on any of the parts.
Main body was printed at .2mm, 4mm brim, 24% infill
The small «locks» were printed at .12mm, no brim, 24% infill
Its a quick and easy print which works nicely with my airbrush setup. And makes it much more affordable.
I really hope you enjoy it !
Feel free to leave a comment on my Youtube Video, or share a picture of you’re build.
Makers gonna share:) Cheers
Link to our YouTube Page:
youtube.com/c/PropsNstuff
Send Me A PayPal Tip:
http://paypal.me/propsnstuff
| A.Frame_Backside_1.stl | 30.4KB | |
| A.Frame_Backside_2.stl | 30.4KB | |
| A.Frame_Front_1.stl | 35.4KB | |
| A.Frame_Front_2.stl | 35.4KB | |
| B.Frame_Backside_1.stl | 25.6KB | |
| B.Frame_Backside_2.stl | 25.6KB | |
| B.Frame_Backside_3.stl | 25.6KB | |
| B.Frame_Backside_4.stl | 25.6KB | |
| B.Frame_Front_1.stl | 28.1KB | |
| B.Frame_Front_2.stl | 28.1KB | |
| B.Frame_Front_3.stl | 28.1KB | |
| B.Frame_Front_4.stl | 28.1KB | |
| Lock_Key.stl | 27.2KB | |
| The_Handle.stl | 16.3KB |
