Update 3/25/23
In the midst of doing some redesigning to get closer to the original drawing. Also changing the shape of the wings as curves look off-putting to the rest of the figure.
Parts have now been printed and I am still tinkering. The outcome should look fairly close to the first picture so use that as a guideline while building. Make sure to use supports while making gcodes. There are holes for pins to make yourself and includes ball joints. I recommend using nails cut down to size for pins you could also use rounded toothpicks. Just about everything will move except for the main body. For a better body print in 2 pieces. Leave a Comment for any questions.
What you need to do is make:
1~4 cm pin for the tail
2~5.4 cm pins for the leg to attach to the body
4~1.4 cm pins for top leg to middle leg
4~1.1 cm pins for middle leg to the bottom leg
4~1.5 cm pins for bottom leg and foot.
2~3 cm pins for the wings
| champfered_gun.stl | 2.4MB | |
| joint_supported.stl | 2.5MB | |
| large_half_body_cut.stl | 8.6MB | |
| neck_body.stl | 12.1MB | |
| neck_head.stl | 2.4MB | |
| new_bottom.stl | 192.7KB | |
| new_feet.stl | 258.8KB | |
| new_middle.stl | 255.5KB | |
| new_thigh.stl | 286.9KB | |
| new_wing.stl | 41.6KB | |
| small_half_body_cut.stl | 3.6MB | |
| spoiler_large_half.stl | 35.4KB | |
| spoiler_small_half.stl | 43.3KB | |
| tail_2.stl | 199.2KB |
![[O-SD 005] GAT-02L2 Dagger L 3D Printer Model](https://cdn.3axis.co/assets/78/64/11/10/78641110-eb5c-4468-8b5b-8cb7c601fb00/images/1d7068aa-83d7-4112-bf4e-3c9c45257fd6_thumb.jpg)
