This is a series of socket and ratchet holders in 1/4" and 3/8" sizes, metric and SAE, regular and deep-well versions. I made this to fit in a drawer approximately 15 1/8" x 18.5".
| 1_4_metric_sockets.ipt | 2.5MB | |
| 1_4_metric_sockets.stl | 2.7MB | |
| 1_4_SAE_Sockets.ipt | 3.8MB | |
| 1_4_SAE_Sockets.stl | 3.6MB | |
| 2x_1_4_ratchet.ipt | 1.2MB | |
| 2x_1_4_ratchet.stl | 963.6KB | |
| 2x_3_8_ratchet.ipt | 1.1MB | |
| 2x_3_8_ratchet.stl | 1.2MB | |
| 3_8_1_4_ratchet.ipt | 812.5KB | |
| 3_8_1_4_ratchet.stl | 1010.2KB | |
| 3_8_Long_metric_sockets.ipt | 1.6MB | |
| 3_8_Long_metric_sockets.stl | 1.8MB | |
| 3_8_Long_SAE_sockets.ipt | 1.9MB | |
| 3_8_Long_SAE_sockets.stl | 2.1MB | |
| 3_8_metric_sockets.ipt | 1.6MB | |
| 3_8_SAE_short_sockets.ipt | 2.4MB | |
| 3_8_SAE_short_sockets.stl | 2.6MB | |
| 3_8_Shortr_metric_sockets.ipt | 1.7MB | |
| 3_8_Shortr_metric_sockets.stl | 2.0MB | |
| dogleg_spacer.ipt | 128.5KB | |
| dogleg_spacer.stl | 114.8KB | |
| drawer_area.ipt | 87.5KB | |
| drawer_filled.iam | 2.9MB | |
| extensions.ipt | 560.5KB | |
| extensions.stl | 963.9KB | |
| spacer.ipt | 115.5KB | |
| spacer.stl | 201.3KB | |
| spacer2.ipt | 125.0KB | |
| spacer2.stl | 144.0KB |
