Custom and modular nose design for RVJET!
It supports action front camera, as well as pan/tilt FPV camera.
The front part of the nose is supposed to be printed using soft plastic, such as TPU, while the rest of the nose can be printed using PLA or PETG.
The front camera that fits the design is DJI Action 3 and 4, but other cameras （like GoPro） can be fitted with some adjustments.
Carbon Fiber Rods:
2 x 110mm x 6mm x 4mm to support the plastic nose.
2 x 90mm x 10mm x 8mm to support the front camera.
1 x 30mm x 10mm x 8mm as a center rod, for holding the action camera.
Magnets:
4x 20mm x 10mm x 3mm.
For the gimbal I used, see Motionsic BAG:
https://fpvdogfight.com/products/motionsic-b-a-g-badass-gimbal
| CE3E3V2_Front_section_TPU.3mf | 1.2MB | |
| CE3E3V2_Nose_main_part1.3mf | 864.8KB | |
| Front_section.stl | 2.0MB | |
| GoPro_latcher.stl | 55.5KB | |
| Nose_design_2023.stl | 1.6MB | |
| Pan-Tilt_cover.stl | 37.2KB | |
| Pan-Tilt_cover2.stl | 81.0KB | |
| RVJet_side_v1.stl | 35.1KB | |
| Tube_Latcher_v3.stl | 306.7KB | |
| Tube_Latcher_v4.stl | 65.3KB | |
| Tube_Latcher_v5.stl | 62.3KB |
