I’d like to share the plates I’ve designed for my Luba
Standard plates can be use with regular blades from different brand (up to 36mm long), they used M4 screws
Smaller plates are made for 49.3mm blades hold with M5 screws
There’s also 10mm spacers to reach factory heights (need 6 M4x22 screws)
Here are the sizes of flanged inserts (found on Aliex)
M4x6.7x6.8xd7.5
M5x6.9x7.1xd7.9
Big blades are the one for Bosch Indigo (pay attention to buy sharpened one on both sides)
Have fun
| entretoise_10mm.stl | 269.4KB | |
| M4-Std_Plate_4Std_Blades.stl | 427.5KB | |
| M4-Std_Plate_5Std_Blades.stl | 461.1KB | |
| M4-Std_Plate_6Std_Blades.stl | 484.8KB | |
| M4-Std_Plate_8Std_Blades.stl | 527.5KB | |
| M5-plain_6BigBlades.stl | 608.9KB | |
| M5-Small_Plate_4BigBlades.stl | 452.6KB | |
| M5-Small_Plate_5BigBlades.stl | 488.3KB | |
| M5-Small_Plate_6BigBlades.stl | 516.0KB |
