This is based on two other designs that I combined to make this custom design. I liked the blade of the one design but preferred a Karambit-style grip.
Print with support, it will be minimal support needed mostly for the handle and very little for the blade.
Printed with PLA or PLA+, but using ABS or TPE could make a more flexible knife.
I printed using the tri-hexagon infill pattern and at 90% infill, for some extra strength.
I printed the Airsoft_Knife_Main2, Airsoft_Knife_Pins, chef_L, and chef_L files as a single print, which took around 11 hours at 60 mm/s print speed.
After printing, the grips, blade and pins are tight-fit, and with very little sanding and elbow grease, it can be put together pretty well. I used very little superglue.
Credit goes to:
https://www.thingiverse.com/thing:3286370 (I included the files for the blade's scabbard)
https://www.thingiverse.com/thing:4965540 (Used this knife's grip/handle)
| Airsoft_Knife_Main2.stl | 193.0KB | |
| Airsoft_Knife_Pins.stl | 25.1KB | |
| chef_L.stl | 428.7KB | |
| chef_R.stl | 428.7KB | |
| Shell_1.stl | 260.6KB | |
| Shell_2.stl | 260.6KB |
