CUSTOM 3D PRINTER 3D Printer Model
The file 'CUSTOM 3D PRINTER 3D Printer Model' is (stl) file type, size is 8.4MB.
The file 'CUSTOM 3D PRINTER 3D Printer Model' is (stl) file type, size is 8.4MB.
| Part_Studio_1_-_Belt_fastner.stl | 207.9KB | |
| Part_Studio_1_-_Con_body.stl | 438.0KB | |
| Part_Studio_1_-_C_clamp_B.stl | 148.1KB | |
| Part_Studio_1_-_C_clamp_L.stl | 76.4KB | |
| Part_Studio_1_-_C_clamp_U.stl | 72.6KB | |
| Part_Studio_1_-_C_man_1.stl | 291.9KB | |
| Part_Studio_1_-_C_man_2.stl | 164.4KB | |
| Part_Studio_1_-_Fan_duct.stl | 815.6KB | |
| Part_Studio_1_-_Fan_shrowd.stl | 2.0MB | |
| Part_Studio_1_-_Hotend_fix.stl | 268.1KB | |
| Part_Studio_1_-_L_Z_axis_motor.stl | 586.1KB | |
| Part_Studio_1_-_Part_37.stl | 30.6KB | |
| Part_Studio_1_-_R_Z_axis_motor.stl | 586.3KB | |
| Part_Studio_1_-_X_belt_adj.stl | 436.6KB | |
| Part_Studio_1_-_X_belt_fix_1.stl | 56.3KB | |
| Part_Studio_1_-_X_belt_fix_2.stl | 56.3KB | |
| Part_Studio_1_-_X_carrage_cooling_fan.stl | 1.1MB | |
| Part_Studio_1_-_X_carrage_L.stl | 1.3MB | |
| Part_Studio_1_-_X_carrage_main.stl | 1.1MB | |
| Part_Studio_1_-_X_carrage_R.stl | 1.3MB | |
| Part_Studio_1_-_X_end_stop_trig.stl | 102.4KB | |
| Part_Studio_1_-_X_ideler_side.stl | 557.8KB | |
| Part_Studio_1_-_X_motor_side.stl | 1.2MB | |
| Part_Studio_1_-_Y_axis_16_mm_clamp.stl | 291.3KB | |
| Part_Studio_1_-_Y_axis_B_fit.stl | 341.8KB | |
| Part_Studio_1_-_Y_axis_F_fit.stl | 1.5MB | |
| Part_Studio_1_-_Y_id_body_1.stl | 162.8KB | |
| Part_Studio_1_-_Y_id_body_2.stl | 61.5KB | |
| Part_Studio_1_-_Y_id_knob.stl | 1.6MB | |
| Part_Studio_1_-_Y_limit_switch.stl | 323.0KB | |
| Part_Studio_1_-_Y_motor_brac.stl | 387.0KB | |
| Part_Studio_1_-_Y_motor_fix.stl | 63.4KB | |
| Part_Studio_1_-_Z_axis_10_mm_bush.stl | 5.6MB | |
| Part_Studio_1_-_Z_axis_top_R.stl | 370.9KB | |
| Part_Studio_1_-_Z_end_stop.stl | 398.2KB | |
| Part_Studio_1_-_Z_m_front_fit.stl | 64.8KB | |
| Part_Studio_1_-_Z_top_suport.stl | 269.1KB |
