Curved Spot Light Arm 3D Printer Model
The file 'Curved Spot Light Arm 3D Printer Model' is (stl) file type, size is 3.0MB.
The file 'Curved Spot Light Arm 3D Printer Model' is (stl) file type, size is 3.0MB.
Curved spot light arm for mounting spot lights on top of a beam, cabinet, etc...
For spot fixtures with M10x1.0mm (fine) thread, commonly used in a lot of cheap spot lights.
In two variants with 120-degree or 180-degree curvature.
Has a feed-through for the power leads.
The 1.0mm pitch can be printed well on fine settings. Print with the threaded section on the bed, see PrusaSlicer screenshot. Wise to add a brim.
Onshape document: https://cad.onshape.com/documents/fdfe95b26f961b7c80e4c1e4/w/87a57acb36a3bb71e4f41e8f/e/3fee23bade4d95a97572667a?renderMode=0&uiState=65d65af6e1faf36fdd5a9785
| 120degrees.stl | 1.1MB | |
| 180degrees.stl | 6.0MB |
