These are parts for making a railway bridge in H0 that is curved and possibly also climbing. Can be used to make a spiral (helix) in several levels.
Straight track is also possible.
The STL files here are mostly samples for illustration.
To print this OpenScad is needed since there are many parameters that need to be adjusted to fit a particular layout. Things like climb rate and height of piers will need to be custom set.
There is also a little cone tree in approximate scale since its to small to be its own thing.
www.drekkar.com
www.eit.se/hb
| pier.scad | 47.7KB | |
| pier_130+140.5.stl | 294.0KB | |
| pier_curved_railing_1_2.6.stl | 924.8KB | |
| pier_curved_railing_inner.stl | 462.4KB | |
| pier_curved_railing_outer.stl | 485.2KB | |
| tree.scad | 2.4KB | |
| tree120.stl | 718.4KB |
