Cupholder V2 For BMW E90 E92 E93 Etc. 3D Printer Model
The file 'Cupholder V2 For BMW E90 E92 E93 Etc. 3D Printer Model' is (stl) file type, size is 7.1MB.
The file 'Cupholder V2 For BMW E90 E92 E93 Etc. 3D Printer Model' is (stl) file type, size is 7.1MB.
This is the better version of my BMW E90 cupholder, which you can find on my profile.
You can now print it on the sloped, upper side to get a much better look!
I could reduce the print time and used material by using the shell-command.
If you print on a Prusa, you might use the textured PEI-sheet to get a nice finish.
This design is under non-commercial license. If you want to sell it, atleast contact me and maybe we can figure something out
So I was looking for a fitting cupholder for my BMW E90 tray and couldn't find one which wasn't too big.
This one fits to your BMW E9x without the big navi and without the iDrive knob. I made 3 versions which can fit 250ml, 330ml or 500ml cans (Germany/EU). With the big one, the walls might get too thin.
This was designed to be printed with PLA.
If you like the design, leave a tip :)
| Cupholder_E90__250ml_57mm_v2.stl | 7.0MB | |
| Cupholder_E90__330ml_sleek_59mm_v2.stl | 5.8MB | |
| Cupholder_E90__330or500ml_66mm_v2.stl | 4.7MB |
