Check out the never version of this cupholder: https://www.thingiverse.com/thing:6766446
Model is based on original BMW1 cupholder
For the "BMW1_cupholder_bottom_part.stl" part as you can see in the photos I used rubber material from bicycle inner tube to prevent petg plastic from scratching the interior.
Dimensions
"BMW1_cupholder_adaptor_for_smaller_cups.stl" - X: 8.68 cm Y: 9.02 cm Z: 2.33 cm
"BMW1_cupholder_main_part.stl" - X: 10.1 cm Y: 12.3 cm Z: 11.4 cm
"BMW1_cupholder_bottom_part.stl" - X: 4.81 cm Y: 4.25 cm Z: 11.6 cm
| BMW1_cupholder_adaptor_for_smaller_cups.stl | 11.8MB | |
| BMW1_cupholder_adaptor_for_smaller_cups_right_hand_drive.stl | 11.8MB | |
| BMW1_cupholder_bottom_part.stl | 7.9MB | |
| BMW1_cupholder_bottom_part_right_hand_drive.stl | 7.9MB | |
| BMW1_cupholder_main_part.stl | 20.0MB | |
| BMW1_cupholder_main_part_right_hand_drive.stl | 20.0MB |
