Printer: Ender-2
Infill: 10%
Layer: 0,2mm
Support: no
Raft: no
Print-time: about 6 hours
Remixed in 3D-Builder
Used filament:
Nunus blue:
https://www.amazon.de/dp/B0728MLGYM/ref=as_li_ss_tl?_encoding=UTF8&psc=1&linkCode=sl1&tag=vapefreak-21&linkId=394381771c0c6a204d828343d43336a4
I use the following buildplate on my CR-10:
https://www.amazon.de/dp/B0728MLGYM/ref=as_li_ss_tl?_encoding=UTF8&psc=1&linkCode=sl1&tag=vapefreak-21&linkId=394381771c0c6a204d828343d43336a4
This thing is really great, but you have to be patient before you can take the objects off of it.
On my Ender-2 I use a 1mm carbon plate coated with kapton tape: https://www.amazon.de/dp/B0728MLGYM/ref=as_li_ss_tl?_encoding=UTF8&psc=1&linkCode=sl1&tag=vapefreak-21&linkId=394381771c0c6a204d828343d43336a4
Another very hot tip is to use kapton tape! Here you get the glossy finish and perfect adhesion like with the blue tape! Look at this:
200mm Kapton tape: https://www.amazon.de/dp/B0728MLGYM/ref=as_li_ss_tl?_encoding=UTF8&psc=1&linkCode=sl1&tag=vapefreak-21&linkId=394381771c0c6a204d828343d43336a4
Have fun!
(Amazon.de Affiliate Links)
| Cupholder_AEGIS_remix.stl | 616.0KB |
