Cup Sleeve With Handle 3D Printer Model
The file 'Cup Sleeve With Handle 3D Printer Model' is (STL) file type, size is 1.7MB.
The file 'Cup Sleeve With Handle 3D Printer Model' is (STL) file type, size is 1.7MB.
Cup Sleeve with handle
This sleeve can fit a 600ml stainless steel cup.
The cup has a diameter of 90mm and a height of about 150mm.
You can also scale and print according to the size of your own cup.
I have provided a test piece of the cup rim, which can help you quickly determine the scaling ratio for the X and Y directions for your print.
The height can also be determined by the specific dimensions given in the image and actual measurements to establish the scaling ratio. (If the cup is a bit shorter, it’s actually not a problem.)
No support needed for printing.
PETG material is recommended.
| Cup_Rim_Diameter_Test_Piece.STL | 93.8KB | |
| Holder.STL | 3.9MB | |
| Lid.STL | 710.0KB |
