Cup Holder Clamp 3 (NO SUPPORTS) 3D Printer Model
The file 'Cup Holder Clamp 3 (NO SUPPORTS) 3D Printer Model' is (stl) file type, size is 7.2MB.
The file 'Cup Holder Clamp 3 (NO SUPPORTS) 3D Printer Model' is (stl) file type, size is 7.2MB.
If the download all button doesn't work, try downloading the files individually. It's a thingiverse bug.
Edit: 20 Jan 2023 - Added taller cup holder
Edit: 10 Dec 2022 Added a longer screw. 20mm longer than original screw
Edit:3/25/2022 - Added a clamp with max desk thickness of 60mm
Edit: 1/14/2022 - Added a clamp with max desk thickness of 45mm
edit: jan 2, 2022 I have modified the cupholder and clamp to fit better. Basically end of the mating pieces are shaped differently. Please be sure to download the latest clamp and cupholder.
This is the latest version of the desk clamp cup holder. Previous versions below. This one DOES NOT require any supports. You can clamp it to your desk, and slide/rotate the cup holder onto the clamp. Max desk thickness is 30mm. This newer design allows for a much stronger clamp due to the new orientation of the layer lines. There are a few test pieces for those who desire to print them before actually printing the entire thing for filament savings to check your fit. The tolerances are quite generous from .2mm .35mm. The pieces are all oriented correctly already.
Printing Tips:
The clamp piece should be printed sideways for a much stronger clamp in regard to layer line direction and is recommended to print at 2mm layer height or smaller for the screw hole overhang. I was able to use .3mm layer height, but just ensure adequate cooling for the screw hole. I don't recommend using any supports in that screw hole since it could obstruct the smoothness of the screw operation.
I recommend using at least 3 walls/shells/perimeters for the clamp, and at least 35% infill. For the cup, recommend at 3 walls, and 15-20% infill should work fine.
If you have any questions, feel free to let me know. Posting any makes would be appreciated.
First Version: https://www.thingiverse.com/thing:4742627
Second Version: https://www.thingiverse.com/thing:5147623
| 60mm_clamp.stl | 1.5MB | |
| clamp.stl | 1.6MB | |
| clamp_45mm_max_size.stl | 1.5MB | |
| cupholder.stl | 272.9KB | |
| longer_screw.stl | 5.2MB | |
| plate.stl | 590.1KB | |
| screw.stl | 3.2MB | |
| taller_cup.stl | 434.7KB | |
| test_clamp.stl | 263.6KB | |
| test_cup_holder_piece.stl | 264.3KB | |
| Test_Screw_hole.stl | 1.6MB |
