A 3d Printable version of the Lamb's sword from Cult of the Lamb
There is 2 versions the one which is split in half that will need to be glued together and the one that is printed vertically which is more liable to breaking but will most likely not need glue although it is still recommended
If you will be printing the split version print 2 of every file except the guard which you will need to only print the part one and the part two
If you will be printing the Vertically printed version then go ahead and print one of each of the files
I have printed this once in a combination of the split and vertical versions and personally i recommend at least printing the handle using the split variant as if you don't it cannot handle the weight of the sword and will break when being handled unless this will be a display piece then the split version will hold together better.
Project I made for my little brother who wanted to be the Goat from COTL for Halloween, decided to upload it here in case anyone was interested in creating their own
| Lamb_Blade_Top_v2_Vertical.stl | 773.7KB | |
| Lamb_Handle_v2_Vertical.stl | 1.7MB | |
| Lamb_Hand_Guard_v2_Vertical.stl | 6.4MB | |
| Lamb_Lower_Blade_v2_Vertical.stl | 583.2KB | |
| Split_-_Lamb_Blade_Top_v2.stl | 457.3KB | |
| Split_-_Lamb_Handle_v2.stl | 905.3KB | |
| Split_-_Lamb_Hand_Guard_v2Part_1.stl | 4.3MB | |
| Split_-_Lamb_Hand_Guard_v2_Part_2.stl | 2.2MB | |
| Split_-_Lamb_Lower_Blade_v2.stl | 304.7KB |
