Cufflink Adapter For Buttoned Shirts 3D Printer Model
The file 'Cufflink Adapter For Buttoned Shirts 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'Cufflink Adapter For Buttoned Shirts 3D Printer Model' is (stl) file type, size is 1.0MB.
Most dress shirts need to be tailored or are more expensive to be used with cufflinks.
I noticed a design for adapters which use buttons, but these did seem a bit expensive for a piece of plastic, so I designed my own!
These should slide over the button (I tested a few different button sizes which worked) and allow for the backing pin to be connected.
-Can be worn as a “French style” as shown in the first and second photo.
-Can also be worn reversed “barrel style” as shown in the third photo.
-Hard plastic version: (like your typical PLA, PETG, etc) which have a bigger slot since the plastic will not bend much
-TPU/flexible version: which doesn't need as big of a slot to fit a button/cufflink into. I wanted to keep these as strong as possible but easy to use.
| Cufflink_Adapter_for_hard_filaments.stl | 1.4MB | |
| Cufflink_Adapter_for_TPU_or_flexible_filament.stl | 1.4MB |
