Cubone Skull – Wearable 3D Printer Model
The file 'Cubone Skull – Wearable 3D Printer Model' is (STL) file type, size is 3.9MB.
The file 'Cubone Skull – Wearable 3D Printer Model' is (STL) file type, size is 3.9MB.
Wearable Cubone Skull Helmet. Perfect for your Cubone Cosplay.
Printed on the Anycubic I3 MEGA which has a build area of 210 mmx 210mm x 205mm.
Pokemon Fans: Check out my Real Working Fully Functional 3D Printed PokeDex
Instructions
Print out all 8 "CB" pieces - Some may require supports and many will require rotating to reduce support material.
The "Cube.stl" piece should be printed about 8 times and sticks into square shaped holes in each of the other pieces to help align the pieces when gluing.
I glued the pieces together with Loctite Super Glue Ultra Gel Control
After gluing I filled in the cracks at the seams with ELMER'S Probond Woodfiller, let it dry and then sanded down the extra wood filler.
Finally, I painted it with Rust-oleum White Primer: Flat White
And for extended wearing, I'd recommend gluing in some foam to protect your head
| CB1.STL | 967.1KB | |
| CB2.STL | 967.4KB | |
| CB3.STL | 1.4MB | |
| CB4.STL | 1.4MB | |
| CB5.STL | 680.3KB | |
| CB6.STL | 680.8KB | |
| CB7.STL | 1.2MB | |
| CB8.STL | 1.2MB | |
| Cube.STL | 1.4KB |
