CubeX To RepRap Conversion Build – WIP 3D Printer Model
The file 'CubeX To RepRap Conversion Build – WIP 3D Printer Model' is (STL,zip) file type, size is 1.5MB.
The file 'CubeX To RepRap Conversion Build – WIP 3D Printer Model' is (STL,zip) file type, size is 1.5MB.
This is my work in progress to Convert a CubeX Trio into a RepRap 3D Printer.
Features: Dual E3D V6 Hot Ends, Auto Bed Leveling and a Silicon Heated Build Plate.
This is a work and progress and I will post the progress and files of the build so others can use it if they want to do a conversion.
Left to do:
New Carraige Mount Design
Full rewire with shielded 26AWG
Rambo Connectors Digikey P/N's: WM2900-ND, WM2901-ND, WM2902-ND, WM2562CT-ND
Plexi Covers for openings with Filament Spool Holders and Hinges
Front Door
Filament Guide Mounts for the Tubes
Ambient Temp Control
Cooling Fan Mounts
Bed with Silicone Heat Pad
Camera Mount
Status Update 07/26/2016
Swapped out the Azteeg X3 for a RAMBO 1.3 and so far it's working great!
Marlin RCBUGFix Firmware added
| Belt_Clamp_1.STL | 43.2KB | |
| Belt_Clamp_2.STL | 43.2KB | |
| E3D-V6_Coupler.STL | 104.3KB | |
| Inductive_Sensor_Bracket.STL | 86.8KB | |
| Marlin-RCBugFix-Rambo.zip | 1.3MB | |
| Terminal_Strip.STL | 72.5KB | |
| X-Axis_Motor_Mount.STL | 275.9KB | |
| Y-Axis_-_Micro_Switch_Mount_Part_1.STL | 108.7KB | |
| Y-Axis_-_Micro_Switch_Mount_Part_2.STL | 50.5KB | |
| Y-Axis_Motor_Mount.STL | 94.5KB |
