This is a lithopane lamp that uses E14 socket lamp. You need to add the the socket (mine was 26mm in diameter) and the wiring. DO NOT do this if you are not allowed/cannot do electrical work with mains voltage.
The parts were printed in PLA 0.15mm layer but I assume that other layer heights would work as well.
Created using Rhinoceros3D and excellent lithopane tool at http://3dp.rocks/lithophane/
| Cthulhu.stl | 81.2MB | |
| Uusikansi.stl | 2.6MB | |
| Uusipohja.stl | 10.0MB |
