You can check my 3D logo projects here:
IG: https://www.instagram.com/the_tiizan/
Twitter: https://twitter.com/Tiizan1
CSGO Nuke: https://www.thingiverse.com/thing:5230839
Please read this before printing or you will probably fail.
This is simplified version of my original Mirage and is NOT tested. Original has more parts and some of the buildings were printed differently.
There might be some mistakes. Please leave a comment if you find any.
This is some sort of QA:
Advanced skills makes everything easier but are not required.
This is designed for 0,25mm nozzle so please use it. If you dont have, order it because you definitely like it. You can use 0,4mm nozzle for store and ground parts. I recommend not to scale models to avoid problems. Scaling up might be ok but definitely should NOT be scaled down.
You should use 1-2mm brim for ALL parts. You can tune brim separation gap to make it easier to remove but brim just decreases chances to fail.
I recommend 0,1mm layer height which is the safest choice. 0,15-0,2mm might also ok but this increases risk to lose details.
Use automatically or manually generated supports. If manually generated, you can save some time but be careful.
Fill density 10% for all parts.
You can iron some parts which makes those smoother but it takes more time.
Use hilbert curve as top fill pattern to add some nice texture for ground, roofs and also other parts.
There are also additional tarpaulins to be printed but those should be modified by scissors after printing. You also need hot air blower if you want those to look like real tarpaulings
https://www.thingiverse.com/thing:2885262 was used as a van but was modified.
Add pillow polyester filling as smoke in the map because it's B rush!
| blue_bottom.stl | 94.0KB | |
| blue_top.stl | 7.9KB | |
| main_ground.stl | 1.3KB | |
| mini_flats.stl | 70.1KB | |
| mini_flats_2.stl | 210.4KB | |
| other.stl | 217.1KB | |
| pink_house.stl | 66.9KB | |
| pipes.stl | 96.0KB | |
| roofs.stl | 46.1KB | |
| short_corner.stl | 1.0MB | |
| short_ground.stl | 1.4KB | |
| short_roof.stl | 1.4KB | |
| short_white.stl | 37.0KB | |
| site.stl | 20.6KB | |
| site_bottom_secondary.stl | 248.6KB | |
| site_boxes.stl | 20.5MB | |
| site_main_bottom.stl | 239.3KB | |
| store.stl | 7.1KB | |
| store_front.stl | 26.3KB | |
| tarpaulins.stl | 22.2KB | |
| van.stl | 523.5KB | |
| wall.stl | 3.8MB | |
| white_bottom.stl | 34.5KB | |
| white_top.stl | 22.1KB |
