CSGO Deagle With Blowback And Shell Ejection 3D Printer Model
The file 'CSGO Deagle With Blowback And Shell Ejection 3D Printer Model' is (stl) file type, size is 2.9MB.
The file 'CSGO Deagle With Blowback And Shell Ejection 3D Printer Model' is (stl) file type, size is 2.9MB.
NOTE: I screwed something up when saving the model as an STL in Fusion360, so you need to scale down the parts to 10%.
This is a desert eagle modeled after the one in CS: GO. Pulling the trigger ejects a shell and blows back the slide. when you are out of shells the slide locks back. there are 3D printed shells and a magazine.
Remixed from this:
https://youtu.be/crbRukzmsZ0?si=xeN9aOSAUejVH2DM
There is a build guide on that channel
you need some rubber bands, glue, and paper clips, and it's kind of hard to assemble but it looks really cool, and it's fun to use when built. sand everything down a lot. The print has a lot of small parts that need to be printed with very high dimensional accuracy or it won't work.
It's a good test of your printer and a very fun print!
| back_sight.stl | 21.9KB | |
| barrel_remake.stl | 216.5KB | |
| bolt_mount.stl | 10.9KB | |
| frount_sight.stl | 5.4KB | |
| hammer.stl | 63.9KB | |
| HC_-_Bolt.stl | 1.2MB | |
| HC_-_Bolt_Hook.stl | 8.3KB | |
| HC_-_Frame.stl | 35.9KB | |
| HC_-_Frame_Mount.stl | 2.2KB | |
| HC_-_Frame_Scoop.stl | 1.1KB | |
| HC_-_Latch.stl | 588.6KB | |
| HC_-_Latch_Mount.stl | 550.6KB | |
| HC_-_Launcher.stl | 34.1KB | |
| HC_-_Mag_Foot.stl | 67.1KB | |
| HC_-_Mag_Left.stl | 99.1KB | |
| HC_-_Mag_Piston.stl | 667.6KB | |
| HC_-_Mag_Release.stl | 610.3KB | |
| HC_-_Mag_Right.stl | 70.3KB | |
| HC_-_Mag_Spring.stl | 411.6KB | |
| HC_-_Shell.stl | 182.9KB | |
| HC_-_Slide_Anchor.stl | 82.7KB | |
| HC_-_Slide_Launcher.stl | 59.0KB | |
| HC_-_Trigger.stl | 990.0KB | |
| HC_-_Trigger_Hook.stl | 29.0KB | |
| HC_-_Trigger_Ramp.stl | 884.0B | |
| left_slide_solid.stl | 134.7KB | |
| lowerV4.stl | 1.7MB | |
| muzzle.stl | 75.4KB | |
| right_slide_solid.stl | 298.2KB | |
| slide_lock.stl | 144.9KB |
