Crystal Light Shade 3D Printer Model
The file 'Crystal Light Shade 3D Printer Model' is (stl) file type, size is 132.9KB.
The file 'Crystal Light Shade 3D Printer Model' is (stl) file type, size is 132.9KB.
Warning: this enclosure will overheat with any light bulb that gives off enough heat to be too hot to touch when on.
This is the exact light bulb I put in there and have not had any issues: https://www.amazon.com/gp/product/B0727Q1K7Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I tried initially printing this in a slightly translucent white, and it was letting too much light through for my taste, so I printed it again with an opaque off-white, and it now produces a very warm yellow light.
I plan to try with a glow in the dark filament to see what it looks like once the light turns out.
No supports needed.
Sorry for the photo quality. I couldn't figure out how to get an accurate picture of the crystal while also showing accurately how well it lights the room.
UPDATE:
I printed one in hatchbox glow in the dark filament, which is white while the light is on, and lets white light through, but glows a bright green when the lights are turned out. It glows bright for 5 minutes, and then holds a dim glow for a long time after that.
Link to the filament (warning, it is recommended that you have a hardened nozzel before printing glow in the dark filament): https://www.amazon.com/gp/product/B00M0CS73S/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
| Crystal_light_shade_No_Ventilation.stl | 152.5KB | |
| Crystal_light_shade_With_Ventilation.stl | 159.5KB |
