Cryptex 1.11 3D Printer Model
The file 'Cryptex 1.11 3D Printer Model' is (STL) file type, size is 22.3MB.
The file 'Cryptex 1.11 3D Printer Model' is (STL) file type, size is 22.3MB.
Cryptex 1.11 - By Adam Kennett
This is not the first iteration of this but it is the first i'm prepared to release. The idea of this Cryptex is that it can be any length of word long and still look nice. atm the cryptex is nine letters if lots of people want other lengths or word i will make the other lengths of key ... or do it yourselves :)
You will need:
lots of m2 bolts - different sizes
get this if you dont have some already
https://www.amazon.co.uk/gp/product/B01C3ZSQAA/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
End_Cap x1
End_Key x1
Top_Ring x1
Outer_ring x9
Outer_Letter_Ring x9
Inner_Ring x9
Notes:
The End key for best results should be printed pattern end up with loads of supports - lots of time though.
Everything else shouldn't need support.
| 011_-_All.STL | 57.8MB | |
| 011_-_end_Cap.STL | 68.8MB | |
| 011_-_end_key.STL | 70.3MB | |
| 011_-_Inner_Ring.STL | 9.5MB | |
| 011_-_Outer_Letter_Ring.STL | 25.8MB | |
| 011_-_Outer_Ring.STL | 1.6MB | |
| 011_-_Top_Ring.STL | 590.2KB |
