All of the 3D prints and options to complete your CRWorks Kiwi racing frame.
If you are planning on using a Foxeer Predator 5 Nano camera, use the HDZero Nano90 Glass Lens prints. For Runcam Racer Nano, either the Glass Lens print will work and be a little loose, or the standard print will work with a little less lens protection.
| Foxeer_Lollipop_30mm_Spacing_Mid_Mount.STL | 318.1KB | |
| Foxeer_Lollipop_30mm_Spacing_Mount.STL | 366.2KB | |
| Kiwi_MK4_Anti-Wiggle_Piece.STL | 181.5KB | |
| Kiwi_MK4_Durrable_Shark_Fin.STL | 3.7MB | |
| Kiwi_MK4_ESC_Spacer.STL | 123.4KB | |
| Kiwi_MK4_FC_Spacer.STL | 20.8KB | |
| Kiwi_MK4_Shark_Fin.STL | 3.6MB | |
| Micro_AxII_2_30mm_Spacing_Mount.STL | 378.8KB | |
| MK4_Nano90_Mid_Mount_45deg.STL | 1.0MB | |
| MK4_Nano90_Mid_Mount_45deg_Glass_Lens.STL | 1011.1KB | |
| MK4_Nano90_Mount_45deg.STL | 1.3MB | |
| MK4_Nano90_Mount_45deg_Glass_Lens.STL | 1.3MB | |
| MK4_Nano90_Mount_47deg.STL | 1.3MB | |
| MK4_Nano90_Mount_47deg_Glass_Lens.STL | 1.3MB | |
| MK4_Nano90_Mount_50deg.STL | 1.3MB | |
| MK4_Nano90_Mount_50deg_Glass_Lens.STL | 1.3MB | |
| MK4_Nano90_Mount_53deg.STL | 1.3MB | |
| MK4_Nano90_Mount_53deg_Glass_Lens.STL | 1.3MB | |
| MK4_Nano90_Mount_54deg_Glass_Lens.STL | 1.3MB | |
| MK4_Nano90_Mount_55deg.STL | 1.4MB | |
| MK4_Nano90_Mount_55deg_Glass_Lens.STL | 1.3MB | |
| RX_Antenna_Mount_30mm_Spacing.STL | 234.3KB | |
| TrueRC_Core_30mm_Spacing_Mount.STL | 424.4KB |
