Crossfire MicroTX Design #3 – V1 And V2 3D Printer Model
The file 'Crossfire MicroTX Design #3 – V1 And V2 3D Printer Model' is (STL) file type, size is 14.7MB.
The file 'Crossfire MicroTX Design #3 – V1 And V2 3D Printer Model' is (STL) file type, size is 14.7MB.
This is my alternative design #3 for TBS Crossfire Micro TX v1 and v2.
It won't fit TBS Tracer as the RP-SMA connector is too long.
For Tracer use my design #1. https://www.thingiverse.com/thing:4772311
This design will improve cooling especially when using 1W power output.
No modification needed and you can put everything back as it was if you don't like it.
The SMA cap is not necessary to print, it's just a part of the design and it should fit even over TBS diamond antenna.
Slim version is for transmitters like X9D as the full version is protruding too much.
You can still use the full design on X9D, but you might break one of the fins over time if you print it from weak material.
Alternatively you can use spacer to extend the carry handle, or use different handle.
To use the bind button, put plastic/nylon 2mm screw through the hole before attaching the board.
If not, you can use LUA script or TBS agent lite to activate binding.
If you have some comments you can also find me on Joshua Bardwell's Discord server.
| TF3_10_full.STL | 7.8MB | |
| TF3_10_full_V1.STL | 7.4MB | |
| TF3_10_slim.STL | 7.8MB | |
| TF3_10_slim_V1.STL | 7.4MB | |
| TF3_10_SMA.STL | 2.3MB |
