This is a rangefinder bracket specifically made for the Barnett Stalker 380 crossbow. I designed this so you can attach the TideWe HR-F700 brand rangefinder. I have no clue if it fits other crossbows or other rangefinders.

Unfortunately, since there has to be warning labels on shampoo and bags of feathers in North America, I too must state: I AM NOT RESPONSIBLE FOR YOU HURTING YOURSELF AT ANY TIME with your crossbow or any other weapon. PRINT AND INSTALL AT YOUR OWN RISK.

MATERIAL LIST

Barnett Stalker 380
https://www.academy.com/p/barnett-stalker-380

TideWe HR-F700 Rangefinder
https://www.amazon.com/dp/B098NL8ZHD

4 M3 x 40 bolts and nuts

Extra long zip tie (11")

INSTRUCTIONS

1x "Crossbow Rangefinder Bracket V2.stl" at 100% infill for durability. Paint on supports as demonstrated in the above photo (blue = supports, red=blocker).
2x "Crossbow Rangefinder Accessory.stl" at 100% infill for durability.
4x screws.
4x nuts.
1x extra long zip-tie.

Place the screws through the holes and attach the accessory at the end of the bracket (hint: the accessory must face the same direction as the teardrop holes on the bracket). Tighten all carefully on the picatinny rail. One zip-tie securely holds the rangefinder in the bracket!

• NOTE: all tolerances are fairly tight.

SUPPLEMENTAL: if you're interested in attaching a GoPro to your bow like I did, visit the original designer's thing at #241751. I've also remixed that one for a mirrored version. My GoPro is set to QuikCapture so I can easily record at the touch of a button before taking the shot.