This was an image i found on Google, i am not the creator of the image, i have only edited for printing.
I made this for my wife as a bookmark.
0.2mm layer height (x3 layers = 0.6mm thick)
2 wall line count (0.4 per line)
205 nozzle temp
70 bed temp
102.5 nozzle flow
Combing - NOT IN SKIN
Z-Hop - 2mm
The cross comes in 4 seperate jobs. red, white, green & black.. MAKE SURE THAT YOU PRINT THE 'BLACK' LAST! this way, if any other color fails, you can stop the print, remove failed color, (carefully!) and re-print. the black outline bonds all the other sections together at the end.
I have included my gcode files, for anyone who has a 200mm printbed.
as each color prints, it also prints a small cylinder tower next to the print, this just helps the me with a z-axis dropping issue i have, which mostly ruins my thinner prints. after color has finshed, just remove the tower, and continue with the next print.
| coloured_rosecross_black.stl | 1.4MB | |
| coloured_rosecross_green.stl | 661.3KB | |
| coloured_rosecross_red.stl | 162.3KB | |
| coloured_rosecross_white.stl | 275.3KB | |
| rosecross_black.gcode | 2.5MB | |
| rosecross_green.gcode | 1.1MB | |
| rosecross_red.gcode | 393.4KB | |
| rosecross_white.gcode | 632.7KB |
