I created this for my wife's crocheting hobby so her pointer finger that helps keep tension wouldn't get raw from the yarn sliding over it. The ring size is a 8.5 (18.54mm) however it can be scaled apropriatly to fit any ring size. Hope this helps someone else!
Update: I have included more ring sizes so scaling may not be required.
| RING_10.5.STL | 581.4KB | |
| RING_10.STL | 587.7KB | |
| RING_11.5.STL | 588.9KB | |
| RING_11.STL | 576.9KB | |
| RING_12.5.STL | 594.4KB | |
| RING_12.STL | 589.8KB | |
| RING_13.STL | 570.7KB | |
| RING_4.5.STL | 507.7KB | |
| RING_5.5.STL | 506.2KB | |
| RING_5.STL | 525.5KB | |
| RING_6.5.STL | 505.6KB | |
| RING_6.STL | 510.1KB | |
| RING_7.5.STL | 516.3KB | |
| RING_7.STL | 514.4KB | |
| RING_8.5.STL | 513.7KB | |
| RING_8.STL | 515.0KB | |
| RING_9.5.STL | 575.2KB | |
| RING_9.STL | 520.6KB |
