Full tutorial: https://learn.adafruit.com/crickit-lab-shaker/
Build a lab shaker to agitate parts with PVA supports! This DIY shaker uses an Adafruit Crickit, Circuit Playground Express and DC motor. The speed is adjustable with a potentiometer. MicroUSB port is accessible for programming. The unit is powered by a power supply for constant usage. With 3D printed parts, electronics and hardware, you can create a lab shaker agitator.
| Crickit_Lab_Shaker.f3d | 6.4MB | |
| Crickit_Lab_Shaker.step | 4.4MB | |
| shaker-bearing-base.stl | 77.6KB | |
| shaker-bottom-cover.stl | 107.7KB | |
| shaker-box.stl | 47.2KB | |
| shaker-holder.stl | 67.9KB | |
| shaker-idler.stl | 70.7KB | |
| shaker-motor-hub.stl | 80.4KB | |
| shaker-plate.stl | 82.3KB | |
| shaker-top-cover.stl | 79.4KB | |
| shaker-tray.stl | 182.6KB |
