Crib Camera Mount 3D Printer Model
The file 'Crib Camera Mount 3D Printer Model' is (stl) file type, size is 10.5KB.
The file 'Crib Camera Mount 3D Printer Model' is (stl) file type, size is 10.5KB.
My child kept knocking the baby cameras off the crib ledge. So I made a camera mount/holder to mount the camera to that doesn't damage the crib. This actually works perfectly for the Delta Children Adley 3-in-1 Convertible Crib from Target. So if you have this crib by chance it'll be a perfect fit. If not I'm sure some mild alterations will work just fine. I chamfered the edges that face the crib so it didn't harm my child if he happened to bump his head on it, this might be an issue if you want to edit it. You'll probably have the cop up the pieces that connect to the crib and just elongate them in something like tinkercad. Be carful just increasing print size because the hole in the center is meant for a screw to mount the camera. I tried multiple methods of making a plastic stud and found the most realistic option is just using a camera screw. Also this mounts the camera at a 45 degree angle to give you a perfect view of the crib from the ledge.
| BABY_CAMERA_MOUNT.stl | 40.7KB |
