Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA Overture Matte Light Gray Transmission Distance: 0.3
PLA Overture Matte White Transmission Distance: 3.7
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Ivory White
At layer #10 (0.88mm) swap to Light Gray
At layer #19 (1.6mm) swap to White for the rest.
| Creepy_Plague_Doctor_Front_200x200.stl | 95.9MB |
