Creative Table Easel, Suitable For A3-A5 Canvases, Adjustable/collapsible 3D Printer Model
The file 'Creative Table Easel, Suitable For A3-A5 Canvases, Adjustable/collapsible 3D Printer Model' is (STL,pdf) file type, size is 6.6MB.
The file 'Creative Table Easel, Suitable For A3-A5 Canvases, Adjustable/collapsible 3D Printer Model' is (STL,pdf) file type, size is 6.6MB.
All parts except one is printed; a flat-headed M3 screw, with two sides grinded flat (see picture) - utilized with the fastener-parts (All measurements available in the assembly manual)
Max Canvas height 360mm.
37 individual printed parts, and a total of 20 assembly plugs.
I used superglue to combine the parts
Infill: 15% hexagonal.
Material: PLA.
Good luck and enjoy :)
| 1._Track_lid.STL | 216.1KB | |
| 1._Vertical_track.STL | 353.6KB | |
| 10.arm.STL | 469.8KB | |
| 10._Anchor.STL | 446.0KB | |
| 10._Canvas_holder.STL | 100.8KB | |
| 10._Clutch.STL | 462.7KB | |
| 10._Knob.STL | 628.1KB | |
| 2._All_plugs.STL | 2.1MB | |
| 3._Horizontal_bubble.STL | 283.6KB | |
| 5._base_with_hole.STL | 202.2KB | |
| 5._Notch_stick.STL | 858.9KB | |
| 5._Transit_base_with_hole.STL | 335.5KB | |
| 6._Arrow.STL | 99.1KB | |
| 6._circular_Part_1.STL | 352.1KB | |
| 6._circular_Part_2.STL | 352.8KB | |
| 6._Connector_plug.STL | 195.1KB | |
| 6._Upper_part_1.STL | 164.3KB | |
| 6._Upper_part_2.STL | 164.4KB | |
| 7._Horizontal_transit_connector_plate.STL | 470.6KB | |
| 7._Reception_Part_1.STL | 338.8KB | |
| 7._Reception_Part_2.STL | 340.3KB | |
| 7._Reception_transit_plate.STL | 301.4KB | |
| 8._Stick_part_1.STL | 2.3MB | |
| 8._Stick_part_2.STL | 2.4MB | |
| 9._Horizontal_canvas_holder_part_1.STL | 324.9KB | |
| 9._Horizontal_canvas_holder_part_2.STL | 334.4KB | |
| 9._Top_Horizontal_track_supporter.STL | 906.1KB | |
| 9._Vertikal_support.STL | 4.0KB | |
| README._Assembly_instructions.pdf | 1.2MB |
