Remix this: https://www.thingiverse.com/thing:5664924
Part list:
44 pcs M5x12 ISO 7380 10.9 0,5 m2 Plexiglass 4mm 12 pcs 8x3 mm (N38) neodymium magnetI tried to simplify the design as much as possible. The threads are cut straight into the PLA (cut very slowly), and I used larger screws, M5x12mm.
It prints without supports. One corner (Sermoon_D1_roh_V2) needs to be printed MIRRORED. You can do this easily in slicer. The corners are completed with small protrusions so that the cover does not shift when a cat jumps on it. Be careful to set the HOME position of the X axis so that it does not collide with the protrusion.
I also attach the plexiglass drawings, they can be used for cutting. The top plate is 420x420mm, but it would be possible to use 428x428mm.
| Plexi_1ks_420x116_vyrez.dwg | 37.4KB | |
| Plexi_1ks_420x420.dwg | 33.7KB | |
| Plexi_3ks_420x116.dwg | 34.7KB | |
| Sermoon_D1_roh_V2.stl | 2.8MB | |
| Sermoon_D1_vyrez_v2.stl | 3.1MB |
