Basically it's this one: https://www.thingiverse.com/thing:6218367 but redrawn and modified. You can see some modifications in the photo.
Installation:
Remove the original screws. The lid is 50mm high (you can change that if needed), so you need four M3*55mm hex socket head screws. Use carbon steel screws instead of stainless steel to take advantage of the magnet in the lid.
Future plan:
Make a large enclosure to hold the bowden tube in the back.
| k1c_raiser_v18.f3d | 417.1KB | |
| k1c_raiser_v18.step | 269.3KB | |
| k1c_raiser_v18_k1c_raiser_v18_raiser_1_left_back.stl | 60.9KB | |
| k1c_raiser_v18_k1c_raiser_v18_raiser_1_left_front.stl | 60.1KB | |
| k1c_raiser_v18_k1c_raiser_v18_raiser_1_right_back.stl | 93.9KB | |
| k1c_raiser_v18_k1c_raiser_v18_raiser_1_right_front.stl | 60.1KB |
