Creality K1 Max Filament Guide 3D Printer Model
The file 'Creality K1 Max Filament Guide 3D Printer Model' is (stl) file type, size is 1.1MB.
The file 'Creality K1 Max Filament Guide 3D Printer Model' is (stl) file type, size is 1.1MB.
This is a filament guide for the Creality K1 Max (may fit K1 as well I don't have one to verify). This is used if you have spools to the left side of your K1 Max and don't like the hard, unsupported, and high friction angle they have to turn. This piece is a press fit and may need cleanup depending on print settings. This locates on the middle screw that secures the glass side panel to the K1 Max. However, It should fit any of the locations depending on desired height.
NOTE: To install this piece to the printer a longer M3*8 screw must be used as the original one on the printer is too short.
NOTE: This requires the use of a 22mm "skateboard bearing" for assembly.
| Creality_K1_MAX__Filimant_Guide.stl | 3.0MB |
