Creality K1 Max – External Filament Sensor Holder 3D Printer Model
The file 'Creality K1 Max – External Filament Sensor Holder 3D Printer Model' is (stl) file type, size is 5.4MB.
The file 'Creality K1 Max – External Filament Sensor Holder 3D Printer Model' is (stl) file type, size is 5.4MB.
This design is the holder for the Creality K1 Max Filament Sensor, to be installed on the right side of the printer externally.
With this addon the bowden pipe will not fold too much ad the filament can run free.
This support is locked to the printer through the 2 screws in the top right corner of the right side of the printer. The original screws are too short so you have to change these 2 screw with 2 longer ones.
The original cable is too short and I didn't want to take apart all the wiring or make holes in the side panel. Therefore I built a 20cm extension to put in series with the original wiring.
In this way all the work can be returned to the origin without modifying the printer.
You will also need 3 M3 nuts to insert into the appropriate slots on the sensor support and three screws of suitable length.
I have also provided two spaces (slums) to insert double-sided tape (optional) in case you want to fix the sensor support more securely. I provided the double-sided tape instead of making holes in the side panel.
| K1_Max_Filament_Sensor_Holder.stl | 14.4MB |
