A simple door latch to hold the K1's door open for airflow, without the door being in the way. Hopefully also prevents someone from accidentally smashing into it and breaking it.
Has several latching positions and hangs on the side when not in use.
You will need longer bolts to attach the base to the printer (in the upper left corner of the right printer wall). Stock bolts will be too short.
Printing:
No supports (see project file for reference). Ideally should be printed from a strong filament like PETG or PLA+.
| arm.stl | 239.1KB | |
| base.stl | 777.7KB | |
| K1_Door_Latch.3mf | 573.6KB |
