The file 'Creality Falcon Laser Module Mount For Ender 5 Pro (10W) 3D Printer Model' is (stl,lbdev,lbprefs) file type, size is 29.4KB.
I wanted to use my Creality Ender 5 Pro with the 10W laser module. unfortunately the kit provided by Creality does not allow the mount on the Ender 5 Pro. Specially if you have the BLTouch and the direct extruder.
This item allows to mount the Creality Falcon Module 10W on a Ender 5 Pro without any permanent modification to the standard 3D printer head.
It took me some time to find the correct settings for Lightburn, but please find attached all the necessary config files including the configuration of the different materials.
These are the used settings:
$0=10
$1=250
$2=0
$3=3
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=0
$24=1500.000
$25=4500.000
$26=20
$27=3.000
$30=1000.000
$31=0.000
$32=1
$100=80.000
$101=80.000
$110=10000.000
$111=10000.000
$120=500.000
$121=500.000
$130=220.000
$131=220.000
Start GCODE:
G28
G10 L20 P1 X220 Y220
| 6iVpYmYTY9w.stl | 121.9KB | |
| Lightburn_Ender_5_pro_device.lbdev | 3.4KB | |
| Lightburn_Preferences.lbprefs | 24.0KB | |
| LightBurn_Settings_for_Ender_5_pro.lbprefs | 23.4KB |
