Creality Ender 3 Pro Dual Drawer 3D Printer Model
The file 'Creality Ender 3 Pro Dual Drawer 3D Printer Model' is (stl) file type, size is 536.51 KB.
The file 'Creality Ender 3 Pro Dual Drawer 3D Printer Model' is (stl) file type, size is 536.51 KB.
Drawers for the Ender 3 Pro.
to print the case put it on the back as shown
Have fun
UPDATE 15.03.2023
Added Drawers without division/inner walls
UPDATE 12.03.2023
It may not be compatible with newer versions of the Ender 3 Pro. Some of you have told me that the bed screws scratch the box.
Thanks to Speedracer59: He found the reason an a fix. "the bolts are in upside down.
I just turned them right side up."
UPDATE 25.06.2019
Fixed the top drawer (slim wall)
Uploaded with the same filename V3_TOP_DRAWER.stl
Thanks to Edimahler for the good advice
UPDATE 13.06.2019 (Please use V3_ Files!)
Thank you for all the constructive comments.
Completely redesigned for a better fit with many improvements:
~ Drawers slightly reduced
~ Removed Logo
~ The lower drawer and the box area are smaller on the left side to increase the airflow of the mainboard vent
~ new handles for printing without supports
~ Rear opening for ventilation when opening and closing the drawers
UPDATE 27.02.2019
for the case that you have problems with not fitting drawers in the box i have added V2 drawers whitch are a little bit smaller
| E3-Pro-big_drawer_schublade_gross_v2.stl |
| E3-Pro-Case.stl |
| E3-Pro-small_drawer_schublade_klein_v2.stl |
| V3_BOTTOM_DRAWER.stl |
| V3_BOTTOM_DRAWER_without_division.stl |
| V3_CASE.stl |
| V3_TOP_DRAWER.stl |
| V3_TOP_DRAWER_without_division.stl |
