Creality Ender 3 Linear Rods ( Rails ) 3D Printer Model
The file 'Creality Ender 3 Linear Rods ( Rails ) 3D Printer Model' is (stl) file type, size is 205.5KB.
The file 'Creality Ender 3 Linear Rods ( Rails ) 3D Printer Model' is (stl) file type, size is 205.5KB.
This is a simple conversion from Y-axis V-wheels to linear rods, many of you may know how wobbly printer's bed may be due to wheels and this modification solves the problem.
This modification will cost you around 50 Euros, which means that you have to buy everything, but if you already have some parts of what you need, it will cost you very little, and the time required for installation is approximately 30/40 min.
Parts what you will need:
2 x LM8LUU
2 x 330mm8mm rods
5 x M58mm Screws
8 x M520mm Screws
7 x M38mm Screws
9 x M5 T-Slot Nuts
10 x M3x4x5 Inserts
4 x M5x6x7 Inserts
After printing everything, I recommend rounding the holes with a drill to make sure everything fits easily, and by the way I recommend you to print with PETG, ABS or ASA, although you can print with PLA it is better to use the other filaments because due to the heat the part where the bed is mounted can deform.
Keep in mind that I designed these parts with the adjustable belt tensioner for the Y axis, with the original tensioner the front parts may not fit or you may not be able to tension the belt and by the way this mod is not suitable for Ender 3 Pro or Ender 3 V2.
If you want to help me a little you can PayPal me: https://www.paypal.com/paypalme/SValentin101?country.x=DE&locale.x=en_US
| Back_Left_Mount-Body.stl | 72.2KB | |
| Back_Right_Mount-Body.stl | 61.2KB | |
| Build_Plate_Mount-Body.stl | 451.8KB | |
| Front_Bottom-Body.stl | 58.7KB | |
| Front_Left_Mount-Body.stl | 99.5KB | |
| Front_Right_Mount-Body.stl | 98.9KB |
